Tips to Safe Use Hydraulic JACK

Tips to Safe Use Hydraulic JACK
  1. Jack selection

    Select the proper Jack at a minimum capacity 120% of the load you are ready to lift. And pay attention to the jack that have more than one jacking point that may need a higher capacity.

  2. Check Integrity

    Before use, check the integrity of the accessories to see if any damage or parts missing. Do not use a bottle jack that have parts missing or obvious damage.

  3. Read Operation Manual

    Before use, be sure to read and understand the instruction manual in detail. Do not remove the warning label on the hydraulic Jack. If warning label damaged or lost, do not use it before relabel it. Before operation, be sure to wear personnel protective equipment such as goggles, safety gloves and so on.

  4. Be sure the bottle jack have enough support that strong and non-sliding.

  5. Refill the hydraulic oil only when the plunger of the cylinder is completely retracted. Do not exceed the maximum capacity recommended when refill the hydraulic oil.

  6. Centering the load on the jacking point to well distribute the load. Otherwise, the loads may fall down during jacking.

  7. When use multiple jacks, be sure the even distribution of loads on each jack.

  8. Support the load when it was raised; Increase the height of the fixed support according to the load raise.

  9. Do not use the jack as permanent support.

  10. Avoid heat and welding Mars that may damage jacks seal

Tips to Safe Use Hydraulic JACK
WORRY-FREE QUALITY AND PROFESSIONAL SERVICE, LIFTING SOLUTION FROM LIFTING EQUIPMENT FACTORY
WORRY-FREE QUALITY AND PROFESSIONAL SERVICE, LIFTING SOLUTION FROM LIFTING EQUIPMENT FACTORY
Let us be your trustworthy material handling equipment supplier of lifting equipment, material handling equipment, rigging & hardware, marine accessories and elevators!
Talk to Us
TITANSUHE Blog & Updates